Fishing reel is also called fish reel and reel. It has […]
Fishing reel is also called fish reel and reel. It has the functions of line storage, rewinding and unwinding. The reel is equipped with a pulling force device, which can adjust the resistance of the line when walking the fish. It has the functions of not easily breaking the line and accelerating the fatigue of the fish. There are many types of fishing vessels, and there are several common fishing vessels:
1. Fly fishing reel
The fly fishing reel is a single-axis fishing reel. There is no automatic winding and unwinding device on the wheel. To take up the line, you must shake the handle, shake and close. This brings certain difficulties to the quick rewinding after catching the fish. But this wheel is equipped with a drag force device, and the drag force is adjusted by a knob on the backrest to control it. Before fishing, it is necessary to adjust in advance according to the strength of the fishing line installed. It is very difficult to adjust it after the fish is hooked.
2. Spinning fishing reel
Spinning fishing reel is also called spinning reel, which is the most used and most common universal fishing reel. The spool is fixed, and the fishing line is wound on the spool by the rotation of the toggle frame connected with the rolling shaft when winding. It has the characteristics of low resistance, fast speed, not easy to disorder the line, simple operation, wide range of use and so on. There is a drag force device on this fishing reel, which can adjust the resistance of the outlet line and play a buffering effect. When catching a big fish, it can automatically set the line with the pulling force of the fish, and adjust the resistance of the line to prevent the line from being pulled by the fish.
According to the different installation positions of the drag force knob, it is divided into the front drag type and the rear drag type. The former is located at the front end of the reel, and its structure is simple. However, the control of the exit resistance is not precise enough. The latter is installed on the rear of the wheel body, which can accurately adjust the resistance of the wire. It has better performance, but the price is more expensive.
3. Closed fishing reel
The structure of the closed fishing reel is basically the same as that of the spinning fishing reel. The difference is that there is a shield outside the reel of the closed fishing reel, the fishing line enters and exits through the shield hole, and the angler presses the button to control the retracting and unwinding line. It has the characteristics of small size, light weight, and not easy to disorder lines. However, it has a small reserve of lines, so it is not suitable for long-range shots and big fish.
4. Drum fishing reel
Also known as double-bearing fishing reel. This kind of wheel is equipped with bearings on both sides of the bearing, and the shaft disk is fixed on both sides, which is similar to a drum shape, so it is called a drum-shaped fishing reel. This kind of fishing reel has precise structure, durability, great fishing power and excellent performance. It is the best fishing tackle for deep-sea fishing and boat fishing. Generally, the fishing power of drum-shaped fishing reels is more than 20 kilograms, and the fishing power of large drum-shaped fishing reels can reach 70-80 kilograms or more. The improved drum-shaped fishing reel is equipped with an electronic calculator, which can display the depth of water entry, the length of the line, the length of the line in the reel, and the signal response when the fish is swallowed. When fishing on a boat, you can use the power supply on the boat to drive the fishing reel to automatically take up the line. The disadvantage of this kind of fishing reel is that the revolving speed of the fishing reel is often faster than the line-out speed during casting. If the control is not good, the line disorder will occur. Now the double-bearing fishing reel produced abroad has added an electromagnetic brake device to make up for its shortcomings.