How to maintain the fishing float is still learning, be […]
How to maintain the fishing float is still learning, because it is directly related to the accuracy of the fishing information, so the maintenance of the fishing float must be paid attention to. Here are some methods and techniques for the use, cleaning and storage of fishing floats:
Use the fishing float, use light force
When the fishing float is "on-line", the feet should be soaked in water before inserting into the float seat. Please hold the bottom of the flag lightly when using it. Some flags are very weak and may be easily deformed if you apply too much force. When fishing, you can't always pull it up suddenly, so it's easy to separate the floating feet from the floating body.
The use and preservation techniques of the new fishing float
The new fishing float has not been put in the water, so it should be "saturated" first. The "saturation" method is to wrap the floating feet with lead sheets and plunge them into the water, soak them overnight. It is best to use this method for bleachers that are not in use temporarily to prevent the bleach from "dehydrating" and cracking the waterproof paint, at least once a month. After the bleached body paint is dry, cracked or peeled, the bleaching image will be inaccurate due to excessive water absorption.
Fish float cleaning
After fishing, pull off the float gently, rinse it with clean water, and wipe the water stains and dirt in one direction with a soft cloth, and then put it into a special float box to prevent the float from being corroded. If there is any dirt that cannot be wiped off, clean it with toothpaste or detergent after going home, then cool it in a ventilated place for more than three hours, and apply wax once before storing. The method of applying wax is to burn the wax and drip it on Apply it on a soft paper or cloth, and then apply it in one direction. This will protect the float. The float should not be in contact with thinner, gasoline, alcohol and other solutions or detergents with too high acidity and alkalinity, which will cause bleaching, paint stripping, deformation and change the original weight of the float, which will affect the accuracy of the float when fishing.
1. The float should be stored in a relatively sturdy float box. Do not use the soft cylinder that comes with the fish float or squeeze several floats into the container, because the float body is easily deformed and damaged by squeezing. The selected floating seat should be properly matched with the standard foot, not too loose or too tight.
2. It can not be exposed to the sun for a long time and stored in a place with high temperature (such as the car and the trunk in summer). If there is glue on the float body, the high temperature will cause the viscosity to change, which may cause the body to separate.
3. When not in use, the whole body of the fish float can be wiped evenly with "rod-protecting oil" for later storage, and maintained once a month. The method is: wipe off the "rod-protecting oil" and soak it in clear water overnight to let the waterproof paint on the float get moisture to prevent the float from being dehydrated due to long storage time. The next day Sassafras sassafras was dried and placed in a ventilated place to cool for more than three hours, and then evenly spread the "rod oil" and continue to store.