The combination of fishing gear is the core of fishing […]
The combination of fishing gear is the core of fishing skills, such as the combination of fishing line, float, fish hook, and plumb, which has always been valued by anglers because it is configured around your fishing situation. It should be based on your fishing situation. The target fish, water regime, and fish regimen are comprehensively considered. For beginners, it is still difficult to tie the line with the fishing group, so today I will tell you how to connect the fishing line with the float. There are many types of floats, each with its own shape and size, so the connection method to the fishing line is also different.
The connection of a single float with a plug-in rod at the tail to the fishing line is only required to insert the floating plug-in rod into a rubber tube or valve core (about 1.5 cm long) on the main line. If you want to adjust the float position, you can move the rubber tube or valve core along the fishing line, and the float can move to the desired position.
The connection of the larger float with a round hole or metal ring at the tail to the fishing lineFirst, a nylon short thread is folded into a double thread to form a thread sleeve. Pass the round hole or metal ring at the tail of the float, drag the thread head from the middle of the thread sleeve that passes through to form a loose knot, tie the float, and hit a Dead knot. Finally, the fixed floating position is selected on the fishing line, and a double loop knot is wound around the fishing line. The dead knot on the floating line is inserted into the double loop knot of the fishing line, and the floating knot can be fixed by tightening the knot. It should be noted that the fixed float position must be selected at a suitable place for the fishing line. The float connected by this method is not easy to slide.
The connection of a single swimming float and fishing lineMost of these floats are large and medium floats with metal rings at the tail and spherical floats with through-holes. They are suitable for long-range float fishing or bottom fishing with sea poles and dual-purpose poles. When connecting with a fishing line, first put a penetrating plastic ball with a diameter of 5-10 mm on the fishing line, and then pass the fishing line through the metal ring at the tail of the float or the through hole of the spherical float, and the pendant and fishing hook. connection. According to the depth of the float or bottom fishing set by the angler, at the appropriate position of the fishing line above the plastic ball, hit the rope with a knot larger than the inner diameter of the through hole of the plastic ball as the cut-off point for the float to slide along the fishing line. The floating float connected in this way can minimize the distance between the floating float and the sinker when throwing the fishing group, which is more convenient for the fishing group.
Connection of multi-floating body and fishing lineMulti-floating bodies refer to line floats, seven-star floats, and so on. These floats are composed of small segments of feather feathers or oval plastic macarons. The floats are small and can be worn directly on the fishing line. The floats are generally about 1 cm apart and can be combined together. The spacing can be adjusted at will.