News

How are rubber and silicone stoppers typically attached to a fishing line?

Update:18-10-2023
Summary:

  Rubber and silicone stoppers, often referred to […]

 

Rubber and silicone stoppers, often referred to as "Big Fish Locks," are typically attached to a fishing line to secure bait, sinkers, or other components. Here's how they are typically attached:

Sliding Method:

The sliding method is one of the most common ways to attach rubber or silicone stoppers. It involves threading the fishing line through the hole in the stopper, allowing the stopper to slide freely along the line.
To do this, follow these steps:
Thread the fishing line through the hole in the stopper from the top.
Slide the stopper along the line to the desired position.
Secure the stopper in place by tying a small overhand knot or loop above it. This prevents the stopper from sliding further along the line.
Fixed Position Method:

In the fixed position method, the stopper is placed on the line at a specific location and secured in place, preventing it from sliding.
To use this method, follow these steps:
Slide the stopper onto the line from the end where it will remain.
Position the stopper at the desired location.
Secure the stopper by tying a knot above it. This knot acts as a fixed point to keep the stopper in place.
Pegging Method (for peg-style stoppers):

Some rubber or silicone stoppers come in a peg-style design, which involves using a peg (typically made of wood or plastic) to secure the stopper in place.
To use this method, follow these steps:
Insert the peg through the stopper's hole.
Slide the line through the peg, allowing the peg to hold the stopper in place.
Position the stopper at the desired location on the line.
Trim any excess peg material to ensure a neat and secure fit.
Beads and Bobber Stops:

Anglers often use beads or bobber stops in conjunction with rubber or silicone stoppers. These beads or bobber stops are threaded onto the line first, followed by the stopper. The bead or bobber stop acts as a barrier to keep the stopper in place.
The choice of attachment method depends on the specific fishing application and the preferences of the angler. The sliding method allows for flexibility in adjusting the stopper's position along the line, while the fixed position method is ideal for situations where a consistent distance from the hook or weight is required. The pegging method is often used with peg-style stoppers, and beads and bobber stops can be employed to enhance the functionality of the stopper.